Formlabs - Resin Washing Solution - (5 l)

Formlabs

Resin Washing Solution

5 l

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.

Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.

Why Choose Formlabs Resin Washing Solution?

Stable and Cost-Effective

Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.

Longer Solution Lifetime

Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution.

Validated Non-Flammable

Non-flammable per GHS classification, mitigating storage and EH&S concerns.

Simplified Sourcing

Whether you buy Formlabs or our partners, you can now get your resins and washing solution all in one place.

Using Formlabs Resin Washing Solution

Utilize the following workflow for best success with Formlabs Resin Washing Solution.

Step 1: Wash Part

According to material recommendations.*

*Volume Requirements:

     • Form Wash (2nd Generation): 3 units (15 liters)

     • ​​​​​​​Form Wash L: 8 units (40 liters)

Step 2: Water Soak

30-60 seconds. No agitation required. Soak parts within 8 hours of washing to prevent part swelling.

Step 3: Accelerated Dry or Air Dry

Use compressed air for 30-60 seconds, a fan for 30-120 minutes, or air dry for 4-6 hours.

Step 4: Cure Part

According to material recommendations.